Getting Started with SteppedPower

Philipp Mildenberger1

Institute of Medical Biostatistics, Epidemiology and Informatics (IMBEI, Mainz)

Federico Marini2

Institute of Medical Biostatistics, Epidemiology and Informatics (IMBEI, Mainz)

2024-04-29

1 About SteppedPower

SteppedPower offers tools for power and sample size calculation as well as design diagnostics for longitudinal mixed model settings, with a focus on stepped wedge designs. Other implemented study design types are parallel, parallel with baseline period(s) and crossover designs. Further design types can be easily defined by the user.

Currently, normal outcomes and binomial outcomes with identity link are implemented. The following random effects can be specified: random cluster intercept, random treatment effect, random subject specific intercept and random time effect. The covariance structure can be compound symmetry or autoregressive.

This package is modularised in order to be flexible and easy to use (and hopefully to maintain as well). At the same time, the use of sparse matrix classes of the matrix package makes computation of large designs feasible.

2 Methods and Notation

A common approach to model the correlation in longitudinal studies are random effects (Hussey and Hughes 2007; Li et al. 2020). Such a model has the form

\[y_{ijk}= T_{ij} \theta + c_i + \mu_j + e_{ijk}\]

with

  • \(y_{ijk}\) the response in cluster \(i\) at time \(j\) for individual \(k\)
  • \(\mu_j\) the time trend at time \(j\)
  • \(T_{ij}\) indicates the treatment status (0 = control, 1 = interventional treatment)
  • \(\theta\) the treatment effect
  • \(c_i\) a random cluster effect for cluster \(i\) with \(c_i \sim N(0,\tau^2)\)
  • \(e_{ijk}\) a normal random error term with \(e_{ijk}\sim N(0,\sigma^2)\)

For power calculation, the standard deviation of random effects is assumed to be known. Let’s define \(\beta:=(\theta,\mu')'\) and \(\omega_{ijk}:=c_i+e_{ijk}\). This leads to a compact and more general notation of the above equation:

\[\begin{align} y_{ijk}&= X_{ij}\beta + \omega_{ijk}\\ \text{or, in matrix notation:} \qquad \\ y&=X\beta + \omega \end{align}\]

Where \(X\) is the corresponding design matrix and \(\omega\sim N(0,\Omega)\), where \(\Omega\) is a compound-symmetry (syn. exchangeable) variance matrix defined by \(\tau\) and \(\sigma\). We are thus in a weighted least squares setting, so the variance of \(\beta\) is

\[ \text{Var}(\hat\beta) = {(X'\Omega^{-1}X)^{-1}}\]

We can then calculate the power of a z-test

\[ \text{power} = \Phi\left(\frac{\theta_A-\theta_0}{\sqrt{\text{Var}(\hat \theta)}}- Z_{1-\frac{\alpha}{2}}\right) \]

where \(\text{Var}(\hat \theta)\) is the diagonal element of \(\Omega\) that corresponds to \(\hat\theta\).

Extensions to the above formula implemented in this package are

with leads to the following extended model formula:

\[y_{ijk}= T (\theta_{ij} + d_i) + c_i + \mu_j + t_{ij} + s_{ijk} + e_{ijk}\] with

  • \(d_i\) a random treatment effect
  • \(c_i\) and \(d_i\) jointly distributed with \(\left(\begin{smallmatrix} \tau^2 & \rho\tau\eta \\ \rho\tau\eta & \eta^2\end{smallmatrix}\right)\)
  • \(s_{ijk}\) a random subject specific effect
  • \(t_{ij}\) a random time effect

2.1 Specification of the correlation structure

A different approach to establish a covariance structure is to directly assume cluster cell correlation as proposed by and introduced to the context of stepped wedge designs in (Li, Turner, and Preisser 2018). They use \(\boldsymbol{\alpha}:=(\alpha_0, \alpha_1, \alpha_2)\) where \(\alpha_0:=\operatorname{corr}({y_{ijk},y_{ijk'}})\) for $ kk’$ defines the within-period correlation; \(\alpha_1:=\operatorname{corr}({y_{ijk},y_{ij'k'}})\) for \(j\neq j', \, k\neq k'\) defines the inter-period correlation and \(\alpha_0:=\operatorname{corr}({y_{ijk},y_{ij'k}})\) for \(j\neq j'\) defines the within-individual correlation.

One receives an easily interpretable correlation matrix, albeit at the cost of some flexibility. We can translate \(\boldsymbol{\alpha}\) into a representation with random effects, given a marginal variance \(\sigma^2_{\text{marg}}\).

\[ \begin{align*} \tau^2 &:= {\sigma^2_{\text{marg}} \alpha_1} \\ \gamma^2 &:= {\sigma^2_{\text{marg}} (\alpha_0-\alpha_1)} \\ \psi^2 &:= {\sigma^2_{\text{marg}} (\alpha_2-\alpha_2)} \\ \sigma^2_{\text{res}} &:= {\sigma^2_{\text{marg}} (1-\alpha_0 - \alpha_2 + \alpha_1)} \end{align*} \]

Note that \(\boldsymbol{\alpha}\) as defined above cannot specify a random treatment effect.

3 A quick tour

For most users, the probably most important function is glsPower. It calls several auxiliary functions which will be shortly discussed here. This section is not essential for the usage of SteppedPower, it might be helpful to design non-standard user defined settings.

glsPower is essentially just a flexible wrapper for the function compute_glsPower, which does the actual computation.
compute_glsPower then calls construct_DesMat and construct_CovMat.

construct_DesMat builds the design matrix which consists of the treatment status, usually built byconstruct_trtMat and the time adjustment, usually built by construct_timeadjust. There is also the option to pass a user defined definition of the treatment status to construct_DesMat. If not specified, the number of timepoints is guessed as the fewest number of periods (timepoints) possible with the given design, i.e. two for cross-over designs or the number of waves plus one for stepped wedge designs.

construct_CovMat builds the covariance matrix (explicitly). It uses construct_CovBlk to construct the blocks for each cluster which are then combined to a block diagonal matrix.

4 Features

4.1 Plot Method

The plot.glsPower method makes up to four plots, visualising the influence of cluster-period cells, the information content of cluster-period cells, the treatment matrix \(T\) and the covariance matrix (selectable by which=).

By default, only the first plot is returned. The information content is also plotted if it the object to be plotted contains the corresponding matrix (which is usually the case). It is constructed by exploiting the approximation to a weighted least squares setting. Therefore, the estimator \(\hat \beta\) is a linear function of the data \(y\)

\[\hat\beta = \underbrace{(X'\Omega^{-1}X)^{-1}(X'\Omega^{-1})}_{=:\text{M}}\cdot y\]

with \(X\) the design matrix and \(\Omega\) the covariance matrix as above. The matrix \(H\) gives an impression of the importance of clusters and time periods with regard to the estimated coefficients \(\hat\beta\). The first row of \(H\) corresponds to the coefficient of the treatment status, i.e. the treatment effect.
The plot.glsPower method visualises this first row of \(M\) as a matrix where rows and columns correspond to clusters and time periods, respectively.

Furthermore, to give a rough comparison of importance between clusters (or between time periods), the sum of absolute weights per row (or per column) is also shown.

glsPwr <- glsPower(Cl=c(3,2,3), mu0=0, mu1=1, sigma=1, tau=.5, verbose=2)
plot(glsPwr,which=1, show_colorbar=FALSE)$WgtPlot 

The information content, as described in (Kasza and Forbes 2019), looks like this:

plot(glsPwr,which=2, show_colorbar=FALSE)$ICplot
#> NULL

CAVE: The influence plot (above) yields out-of-bag estimates for the influence of observations on \(\hat\theta\), but not for \(\text{Var}(\hat\theta)\). The information content (below) visualises the relative change in \(\text{Var}(\hat\theta)\) when one particular cluster period is omitted.

4.2 Find Sample Size for given Power

When the argument power is passed to glsPower, the sample size needed is calculated, under the assumption of equally sized clusters and periods.

glsPower(Cl=c(3,3,3), mu0=0, mu1=.2, sigma=1, tau=0, power=.8)
#> Power                                = 0.8074
#> Significance level (two sided)       = 0.05
#> Needed N per cluster per period      = 50

So in this setting, you would need \(50\) individuals per period in each cluster to achieve a target power of \(80\%\)

5 Use cases and examples

5.1 Comparison of two groups – Z-Test

This might be a proof of concept rather than an example with practical relevance, but let’s try to compare the mean in two groups. For two groups of 10 observations each, the power of a Z-test can be calculated as follows:

glsPower(Cl=c(10,10), mu0=0,mu1=1.2,sigma=1, tau=0, N=1, 
              dsntype="parallel", timepoints=1)$power
#> [1] 0.7652593

## the same:
glsPower(Cl=c(1,1), mu0=0,mu1=1.2, sigma=1, tau=0, N=10,
              dsntype="parallel", timepoints=1)$power
#> [1] 0.7652593
pwr::pwr.norm.test(.6,n=20)$power
#> [1] 0.7652593

A quick note on t-tests: It is much more challenging to use SteppedPower to reproduce settings in which the variance is assumed to be unknown, most prominently the well known t-test. In this package, you find implemented some (experimental) heuristics for guessing the denominator degrees of freedom, but they yield rather scaled Wald tests than t-tests. The main difference is that the distribution under the alternative is assumed to be symmetric, whereas the t-test assumes a non-central (hence skewed) t-distribution.

5.2 Longitudinal study – parallel groups

glsPower(Cl=c(10,10),timepoints=5,mu0=0,mu1=.25,
         sigma=.5,dsntype="parallel")
#> Power                                = 0.7054
#> Significance level (two sided)       = 0.05

glsPower(Cl=c(10,10),timepoints=5,mu0=0,mu1=.25,
         sigma=.5,tau=.2,dsntype="parallel")
#> Power                                = 0.4616
#> Significance level (two sided)       = 0.05

5.3 Stepped Wedge designs with empty sequences (i.e. waves)

Periods in which no cluster switches to the intervention are specified by inserting zeros into the Cl argument, i.e. Cl=c(4,4,4,0).

mod1 <- glsPower(Cl=c(1,1,1,0), mu0=0, mu1=1, 
                 sigma=0.4, tau=0, verbose=2)

The treatment matrix is then stored under mod1$DesignMatrix$trtMat:

0 1 1 1 1
0 0 1 1 1
0 0 0 1 1

5.4 Autocorrelated random effects

In longitudinal studies, it can be sensible to assume that correlation within clusters decreases with increasing time lag. The argument AR enables the user to specify a AR-1 correlation. AR must be any value between 0 and 1. The former corresponds to i.i.d. observations, the latter to the usual compound symmetry covariance type.

Optionally, you can pass a vector of up to length three to AR. Then, the first element applies to the cluster intercept, the second to the treatment effect (i.e. slope) and the third to the subject specific intercept. This is especially useful for open cohort designs (see below).

An example of a stepped wedge design with 8 clusters in 4 waves, once with medium autocorrelation (AR=0.6) and once with high autocorrelation (AR=0.95):

mod2 <- glsPower(Cl=c(2,2,2,2), mu0=0, mu1=1, 
              sigma=1, N=100, tau=1, AR=.6, verbose=2)

mod3 <- glsPower(Cl=c(2,2,2,2), mu0=0, mu1=1, 
              sigma=1, N=100, tau=1, AR=.95, verbose=2)

For AR=0.6, the covariance matrix within one cluster then looks like this:

1.0100 0.600 0.36 0.216 0.1296
0.6000 1.010 0.60 0.360 0.2160
0.3600 0.600 1.01 0.600 0.3600
0.2160 0.360 0.60 1.010 0.6000
0.1296 0.216 0.36 0.600 1.0100

For AR=0.95 it takes the following shape

1.0100000 0.950000 0.9025 0.857375 0.8145062
0.9500000 1.010000 0.9500 0.902500 0.8573750
0.9025000 0.950000 1.0100 0.950000 0.9025000
0.8573750 0.902500 0.9500 1.010000 0.9500000
0.8145062 0.857375 0.9025 0.950000 1.0100000

5.5 Unequal cluster sizes

The argument N defines the cluster size. N can be

  • a scalar, if all clusters have the same assumed size, which is also constant over time
  • a vector, if the size differs between clusters but is assumed to be constant over time
  • a matrix where each row corresponds to either a cluster or a wave of clusters and each column corresponds to a timepoint
mod4 <- glsPower(Cl=c(1,1,1), mu0=0, mu1=1, N=c(1,3,10), 
                 sigma=1, tau=.5, verbose=2)
plot(mod4, which=2, show_colorbar=FALSE)$ICplot
#> NULL

5.6 Incomplete Stepped Wedge Designs

Suppose you do not plan to observe all clusters over the whole study period. Rather, clusters that switch early to the intervention are not observed until the end. Analogous, observation starts later in clusters that switch towards the end of the study. This is sometimes called ‘incomplete SWD’ (Hemming et al. 2015).

There are two ways to achieve this in SteppedPower, both by using the incomplete argument. One can either scalar, which then defines the number of observed periods before and after the switch from control to intervention in each cluster.

If for example the study consists of eight clusters in four sequences (i.e. five timepoints), and we observe two timepoints before and after the switch, then we receive

incompletePwr <- glsPower(Cl=rep(2,4), sigma=2, tau=.6, mu0=0,mu1=.5, N=80, 
                             incomplete=2, verbose=2)
incompletePwr
#> Power                                = 0.8221
#> Significance level (two sided)       = 0.05

A slightly more tedious, but more flexible way is to define a matrix where each row corresponds to either a cluster or a wave of clusters and each column corresponds to a timepoint. If a cluster is not observed at a specific timepoint, set the value in the corresponding cell to 0. For the example above, such a matrix would look like this:

TM  <- toeplitz(c(1,1,0,0))
incompleteMat1 <- cbind(TM[,1:2],rep(1,4),TM[,3:4])
incompleteMat2 <- incompleteMat1[rep(1:4,each=2),]

A matrix where each row represents a wave of clusters

1 1 1 0 0
1 1 1 1 0
0 1 1 1 1
0 0 1 1 1

or each row represents a cluster

1 1 1 0 0
1 1 1 0 0
1 1 1 1 0
1 1 1 1 0
0 1 1 1 1
0 1 1 1 1
0 0 1 1 1
0 0 1 1 1

Now all that’s left to do is to plug that into the main function:

incompletePwr1 <- glsPower(Cl=rep(2,4), sigma=2, tau=.6, mu0=0, mu1=.5, N=80, 
                        incomplete=incompleteMat1, verbose=2)
incompletePwr2 <- glsPower(Cl=rep(2,4), sigma=2, tau=.6, mu0=0, mu1=.5, N=80, 
                        incomplete=incompleteMat2, verbose=2)

all.equal(incompletePwr,incompletePwr1)
#> [1] "Component \"DesignMatrix\": Component \"incompMat\": 'is.NA' value mismatch: 0 in current 12 in target"
all.equal(incompletePwr,incompletePwr2)
#> [1] "Component \"DesignMatrix\": Component \"incompMat\": 'is.NA' value mismatch: 0 in current 12 in target"

We can also have a quick look at the projection matrix where we see that the clusters have a weight of exactly zero at the timepoints where they are not observed

plot(incompletePwr, show_colorbar=FALSE)$WgtPlot

The argument incomplete with matrix input works also for other design types, but makes (supposedly) most sense in the context of stepped wedge designs

5.8 Closed cohort SWD

In a closed cohort the patients are observed over the whole study period. The same correlation structure arises in cross sectional stepped wedge designs if subclusters exist (such as wards within clinics). The argument psi denotes the standard deviation of a random subject (or subcluster) specific intercept.

The power is calculated on aggregated cluster means:

Closed1 <- glsPower(mu0=0, mu1=5, Cl=rep(3,3), 
                    sigma=5, tau=1, psi=3,
                    N=3, verbose=2)
Closed1
#> Power                                = 0.8524
#> Significance level (two sided)       = 0.05

With INDIV_LVL=TRUE, the calculation is done on the individual level. This yields the same results but is far more computationally expensive and is mainly intended for diagnostic purposes.

Closed2 <- glsPower(mu0=0, mu1=5, Cl=rep(3,3), 
                    sigma=5, tau=1, psi=3,
                    N=3, verbose=2, INDIV_LVL = TRUE)
Closed2
#> Power                                = 0.8524
#> Significance level (two sided)       = 0.05
plot(Closed2, annotations=FALSE, show_colorbar=FALSE)$WgtPlot
Closed1$power - Closed2$power
#> [1] -5.551115e-16

5.9 Open cohort designs

The AR argument mentioned above specifies the autocorrelation of random effects. It offers a convenient way to model open cohort designs. The third element of AR can be seen as the estimated probability that a subject included in period \(j\) is also included in period \(j+1\), instead of being replaced by a new subject.

Expanding on the closed cohort example above, one could assume that subjects have a 75% chance to reappear in the next study period.

Open1 <- glsPower(mu0=0, mu1=5, Cl=rep(3,3), 
                  sigma=5, tau=1, psi=3, AR=c(1,1,.75), N=3)

Closed1$power
#> [1] 0.8524223
Open1$power
#> [1] 0.8284796

So this would result in a power loss of roughly 2.4% compared to a closed cohort design in this case.

5.9.1 Covariance structure for open cohort designs

This proposed covariance structure is then a mixture of exchangeable (on cluster level) and autoregressive (on subject level). Let’s have a look at a toy example with three clusters, each consisting of three subjects. The probability that an individual reappears in two consecutive periods is estimated to be 60%. The covariance matrix (on subject level) could be visualised as follows:

Open2Indiv <- glsPower(mu0=0, mu1=10, Cl=c(1,1,1,0), 
                       sigma=1, tau=5, psi=10, AR=c(1,1,.60),
                       N=3, verbose=2, INDIV_LVL=TRUE)

plot(Open2Indiv, which=4, show_colorbar=FALSE)$CMplot

Note that you can zoom to get a better look at the structure. The autoregressive structure on the subject level in the small boxes along the main diagonal and the block exchangeable structure on cluster level becomes evident.

5.10 Reproducing common closed formulae

There exist some formulae that do not explicitly construct design and covariance matrices, most notably (Kasza et al. 2020) and (Li 2020). Both include the one presented in (Hussey and Hughes 2007) as a special case.

These formulae are also implemented in SteppedPower. As a showcase, here is an example that is loosely based on the example in (Hussey and Hughes 2007):

trtMat <- construct_DesMat(c(6,6,6,6))$trtMat
mu0 <- 0.05 ; mu1 <- 0.032 ; N <- 100 

tau <- .025 ; sigma <- sqrt(.041*.959) 
gamma <- 0.01 ; psi <- .1 ; chi <- .5 ; AR <- .5

5.10.1 Closed formula for proportional decay structure

VarClosed_Li computes the treatment variance for stepped wedge designs with a autoregressive (syn. proportional decay) structure. It can be used to compute a variance for the treatment effect and thus the power for the setting in question:

tmp <- VarClosed_Li(trtMat, tau=tau, psi=psi, N=N, AR=AR)
tTestPwr(mu0-mu1, se=sqrt(tmp), df=Inf)
#> [1] 0.7870855

Explicit calculation yields the same:

a <- SteppedPower::glsPower(Cl=rep(6,4), mu0=mu0, mu1=mu1, AR=AR,
                       sigma=0, tau=tau, N=N, psi=psi, verbose=1, INDIV_LVL = TRUE)
a
#> Power                                = 0.7871
#> Significance level (two sided)       = 0.05

5.10.2 Closed formula for open cohort designs

Kasza et al. offer an extension to open cohort designs by the use of an attrition or churn rate chi (Kasza et al. 2020). It can be understood as the estimated probability that a subject included in period \(j\) is also included in period \(j'\) for \(j\ne j'\). Note that this differs from the approach mentioned above, as it results in a mixture of exchangeable covariance matrices.

Since it differs from the way SteppedPower intents to model open cohort designs, it requires a bit of tinkering to reproduce the results of the closed formula with this package. It can be done with the help of the random time effect (gamma).

tmp <- VarClosed_Kasza(trtMat, sigma=sigma, tau=tau, gamma=gamma, psi=psi, N=N, chi=0)
tTestPwr(mu0-mu1, se=sqrt(tmp), df = Inf)
#> [1] 0.7145816
glsPower(Cl = rep(6,4), N=N, mu0=mu0, mu1=mu1, verbose=0,
         sigma=sigma, tau=tau, gamma=gamma, psi=psi)
#> [1] 0.7145816

tmp <- VarClosed_Kasza(trtMat, sigma=sigma, tau=tau, gamma=gamma, psi=psi, N=N, chi=1)
tTestPwr(mu0-mu1, sqrt(tmp), df = Inf)
#> [1] 0.6451082
glsPower(Cl = rep(6,4), N=N, mu0=mu0, mu1=mu1, verbose=0,
         sigma=sigma, tau=tau, 
         gamma=sqrt(gamma^2+psi^2/N), psi=0)
#> [1] 0.6451082

tmp <- VarClosed_Kasza(trtMat, sigma=sigma, tau=tau, gamma=gamma, psi=psi, N=N, chi=chi)
tTestPwr(mu0-mu1, sqrt(tmp), df = Inf)
#> [1] 0.6778561
glsPower(Cl = rep(6,4), N=N, mu0=mu0, mu1=mu1, verbose=0,
         sigma=sigma, tau=tau, 
         gamma=sqrt(gamma^2+chi*psi^2/N), psi=sqrt(1-chi)*psi)
#> [1] 0.6778561

Session Info

#> R version 4.4.0 (2024-04-24 ucrt)
#> Platform: x86_64-w64-mingw32/x64
#> Running under: Windows 10 x64 (build 19045)
#> 
#> Matrix products: default
#> 
#> 
#> attached base packages:
#> [1] stats     graphics  grDevices utils     datasets  methods   base     
#> 
#> other attached packages:
#> [1] plotly_4.10.4      ggplot2_3.5.1      Matrix_1.7-0       SteppedPower_0.3.5
#> [5] knitr_1.46        
#> 
#> loaded via a namespace (and not attached):
#>  [1] sass_0.4.9         utf8_1.2.4         generics_0.1.3     tidyr_1.3.1       
#>  [5] lattice_0.22-6     digest_0.6.35      magrittr_2.0.3     evaluate_0.23     
#>  [9] grid_4.4.0         pwr_1.3-0          fastmap_1.1.1      jsonlite_1.8.8    
#> [13] httr_1.4.7         purrr_1.0.2        fansi_1.0.6        crosstalk_1.2.1   
#> [17] viridisLite_0.4.2  scales_1.3.0       lazyeval_0.2.2     jquerylib_0.1.4   
#> [21] cli_3.6.2          rlang_1.1.3        munsell_0.5.1      withr_3.0.0       
#> [25] cachem_1.0.8       yaml_2.3.8         tools_4.4.0        parallel_4.4.0    
#> [29] dplyr_1.1.4        colorspace_2.1-0   Rfast_2.1.0        RcppZiggurat_0.1.6
#> [33] vctrs_0.6.5        R6_2.5.1           lifecycle_1.0.4    htmlwidgets_1.6.4 
#> [37] pkgconfig_2.0.3    RcppParallel_5.1.7 pillar_1.9.0       bslib_0.7.0       
#> [41] gtable_0.3.5       glue_1.7.0         data.table_1.15.4  Rcpp_1.0.12       
#> [45] xfun_0.43          tibble_3.2.1       tidyselect_1.2.1   rstudioapi_0.16.0 
#> [49] farver_2.1.1       htmltools_0.5.8.1  rmarkdown_2.26     compiler_4.4.0

References

Hemming, Karla, Terry P Haines, Peter J Chilton, Alan J Girling, and Richard J Lilford. 2015. “The Stepped Wedge Cluster Randomised Trial: Rationale, Design, Analysis, and Reporting.” Bmj 350.
Hemming, Karla, and Monica Taljaard. 2020. “Reflection on Modern Methods: When Is a Stepped-Wedge Cluster Randomized Trial a Good Study Design Choice?” International Journal of Epidemiology.
Hussey, Michael A, and James P Hughes. 2007. “Design and Analysis of Stepped Wedge Cluster Randomized Trials.” Contemporary Clinical Trials 28 (2): 182–91.
Kasza, Jessica, and Andrew B. Forbes. 2019. “Information Content of Cluster–Period Cells in Stepped Wedge Trials.” Biometrics 75 (1): 144–52. https://doi.org/https://doi.org/10.1111/biom.12959.
Kasza, Jessica, Richard Hooper, Andrew Copas, and Andrew B Forbes. 2020. “Sample Size and Power Calculations for Open Cohort Longitudinal Cluster Randomized Trials.” Statistics in Medicine 39 (13): 1871–83.
Li, Fan. 2020. “Design and Analysis Considerations for Cohort Stepped Wedge Cluster Randomized Trials with a Decay Correlation Structure.” Statistics in Medicine 39 (4): 438–55.
Li, Fan, James P Hughes, Karla Hemming, Monica Taljaard, Edward R Melnick, and Patrick J Heagerty. 2020. “Mixed-Effects Models for the Design and Analysis of Stepped Wedge Cluster Randomized Trials: An Overview.” Statistical Methods in Medical Research.
Li, Fan, Elizabeth L Turner, and John S Preisser. 2018. “Sample Size Determination for GEE Analyses of Stepped Wedge Cluster Randomized Trials.” Biometrics 74 (4): 1450–58.